Yealink W53P

Security Features
189
1-var
2-admin
Default 0
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.
Auto Logout Time
Auto logout time defines how long to log out the web user interface automatically when you do not perform any
actions on web user interface. Once logging out, you must re-enter username and password for web access authen-
tication.
Topic
Auto Logout Time Configuration
Auto Logout Time Configuration
The following table lists the parameter you can use to configure the auto logout time.
Parameter features.relog_offtime <y0000000000xx>.cfg
Description
It configures the timeout interval (in minutes) for web access authentication.
Example:
features.relog_offtime = 5
If you log into the web user interface and leave it idle for 5 minutes, it will automatically log out.
Permitted Values Integer from 1 to 1000
Default 5
Web UI Features->General Information->Auto Logout Time(1~1000min)
Base PIN
To avoid unauthorized register or access to some features on the handset, you should keep the base PIN secret.
You can change the base PIN for security.
Topic
Base PIN Configuration
Base PIN Configuration
The following table lists the parameters you can use to configure the base PIN.
Parameter base.pin_code <y0000000000xx>.cfg
Description It configures the base PIN.
Permitted
Values
Integer from 0000 to 9999