Yealink W53P

Account Settings
99
Web UI Account->Advanced->Send user=phone
Parameter
account.X.register_mac
[1]
<MAC>.cfg
Description It enables or disables the IP phone to add MAC address to the SIP header of the REGISTER message.
Permitted Val-
ues
0-Disabled
1-Enabled
Default 0
Web UI Account->Advanced->SIP Send MAC
Parameter
account.X.register_line
[1]
<MAC>.cfg
Description It enables or disables the IP phone to add a line number to the SIP header of the REGISTER message.
Permitted Val-
ues
0-Disabled
1-Enabled
Default 0
Web UI Account->Advanced->SIP Send Line
Default 0
Parameter
account.X.unregister_on_reboot
[1]
<MAC>.cfg
Description It enables or disables the IP phone to unregister first before re-registering account X after a reboot.
Permitted Val-
ues
0-Disabled
1-Enabled
Default 0
Web UI Account->Advanced->Unregister When Reboot
Parameter
account.X.sip_server_type
[1]
<MAC>.cfg
Description It configures the type of the SIP server.
Permitted Val-
ues
0-Default
2-BroadSoft (It works only if “bw.enable" is set to 1 (Enabled))
8-Genesys
10-Genesys Advanced
Default 0
Web UI Account->Advanced->SIP Server Type
Parameter
sip.reg_surge_prevention
[2]
<y0000000000xx>.cfg
Description It configures the waiting time (in seconds) for account register after startup.
Permitted Val-
ues
Integer from 0 to 60
Default 0
Web UI Network->Advanced->Registration Random->Registration Random (0~60s)
Parameter
account.X.subscribe_register
[1]
<MAC>.cfg