Yealink W53P - Page 131

Administrator’s Guide for W60P/W53P/W41P DECT Phones
124
ldap.max_hits = 50
Permitted
Values
Integer from 1 to 32000
Default 50
Web UI Directory->LDAP->Max Hits (1-32000)
Parameter ldap.name_attr <y0000000000xx>.cfg
Description
It configures the name attributes of each record to be returned by the LDAP server. It compresses the
search results. You can configure multiple name attributes separated by spaces.
Example:
ldap.name_attr = cn sn
This requires the “cn” and “sn” attributes set for each contact record on the LDAP server.
Permitted
Values
String within 99 characters
Default Blank
Web UI Directory->LDAP->LDAP Name Attributes
Parameter ldap.numb_attr <y0000000000xx>.cfg
Description
It configures the number attributes of each record to be returned by the LDAP server. It compresses the
search results. You can configure multiple number attributes separated by spaces.
Example:
ldap.numb_attr = mobile ipPhone
This requires the “mobile” and “ipPhone” attributes set for each contact record on the LDAP server.
Permitted
Values
String within 99 characters
Default Blank
Web UI Directory->LDAP->LDAP Number Attributes
Parameter ldap.display_name <y0000000000xx>.cfg
Description
It configures the display name of the contact record displayed on the phone screen.
The value must start with “%” symbol.
Example:
ldap.display_name = %cn
The cn of the contact record is displayed on the phone screen.
Permitted
Values
String within 99 characters
Default Blank
Web UI Directory->LDAP->LDAP Display Name
Parameter ldap.version <y0000000000xx>.cfg
Description
It configures the LDAP protocol version supported by the IP phone. The version must be the same as the