Yealink W53P

Call Features
155
ture on the IP phone.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled).
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Forward&DND->Forward->AccountX->Busy Forward->Off Code
Parameter
account.X.timeout_fwd.enable
[1]
<MAC>.cfg
Description
It triggers no answer forward feature to on or off.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled). DND activated on the specific account
deactivates the local No Answer Forward settings.
Permitted
Values
0-Off
1-On, incoming calls to the account X are forwarded to the destination number (configured by the para-
meter “account.X.timeout_fwd.target”) after a period of ring time.
Default 0
Web UI Features->Forward&DND->Forward->AccountX->No Answer Forward->On/Off
Handset UI OK->Call Features->Call Forward->LineX->No Answer(Disabled/Enabled) ->Status
DD Phone
UI
Menu->Features->Call Forward->AccountX->No Answer Forward->No Answer Forward
Parameter
account.X.timeout_fwd.target
[1]
<MAC>.cfg
Description
It configures the destination number of the no answer forward.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled).
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Forward&DND->Forward->AccountX->No Answer Forward->Target
Handset UI OK->Call Features->Call Forward->LineX->No Answer(Enabled) ->Target
DD Phone
UI
Menu->Features->Call Forward->AccountX->No Answer Forward->Forward to
Parameter
account.X.timeout_fwd.timeout
[1]
<MAC>.cfg
Description
It configures ring times (N) to wait before forwarding incoming calls.
The incoming calls will be forwarded when not answered after N*M (M is configurable by “phone_set-
ting.ring_duration”) seconds.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled).
Permitted
Values
Integer from 0 to 20
Default 2
Web UI Features->Forward&DND->Forward->AccountX->No Answer Forward->After Ring Time(0~120s)
Handset UI OK->Call Features->Call Forward->LineX->No Answer(Enabled) ->After Ring Time