Yealink W53P - Page 192

Audio Features
185
Note: It will take effect on all handsets that are registered on the same base station. It works only if “stat-
ic.auto_provision.handset_configured.enable” is set to 1 (Enabled) and the silent mode is off. It is not
applicable to DD phones.
Permitted
Values
0-Disabled
1-Enabled
Default 1
Handset UI OK->Settings->Audio->Advisory Tones->Confirmation
Parameter custom.handset.low_battery_tone.enable <y0000000000xx>.cfg
Description
It enables or disables the handset to play a tone when battery capacity is low.
Note: It will take effect on all handsets that are registered on the same base station. It works only if “stat-
ic.auto_provision.handset_configured.enable” is set to 1 (Enabled) and the silent mode is off. It is not
applicable to DD phones.
Permitted
Values
0-Disabled
1-Enabled
Default 1
Handset UI OK->Settings->Audio->Advisory Tones->Low Battery