Yealink W53P - Page 240

Troubleshooting Methods
233
Parameter static.auto_provision.local_log.backup.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to upload the local log files (<MAC>-boot.log and <MAC>-sys.log)
to the provisioning server or a specific server.
Note: The upload path is configured by the parameter “static.auto_provision.local_log.backup.path”.
Permitted
Values
0-Disabled
1-Enabled, the IP phone will upload the local log files to the provisioning server or the specific server to
back up these files when one of the following happens:
- Auto provisioning is triggered;
- The size of the local log files reaches the maximum configured by the parameter “static.local_log.max_
file_size”;
- It’s time to upload local log files according to the upload period configured by the parameter “stat-
ic.auto_provision.local_log.backup.upload_period”.
Default 0
Parameter static.auto_provision.local_log.backup.upload_period <y0000000000xx>.cfg
Description
It configures the period (in seconds) of the local log files (<MAC>-boot.log and <MAC>-sys.log)
uploads to the provisioning server or a specific server.
Example:
static.auto_provision.local_log.backup.upload_period = 60
Note: It works only if “static.auto_provision.local_log.backup.enable” is set to 1 (Enabled).
Permitted
Values
Integer from 30 to 86400
Default 30
Parameter static.auto_provision.local_log.backup.path <y0000000000xx>.cfg
Description
It configures the upload path of the local log files (<MAC>-boot.log and <MAC>-sys.log).
If you leave it blank, the IP phone will upload the local log files to the provisioning server.
If you configure a relative URL (for example, /upload), the IP phone will upload the local log files by
extracting the root directory from the access URL of the provisioning server.
If you configure an absolute URL with the protocol (for example, tftp), the IP phone will upload the
local log files using the desired protocol. If no protocol, the IP phone will use the same protocol with
auto provisioning for uploading files.
Example:
static.auto_provision.local_log.backup.path = tftp://10.3.6.133/upload/
Note: It works only if “static.auto_provision.local_log.backup.enable” is set to 1 (Enabled).
Permitted
Values
URL within 1024 characters
Default Blank
Parameter static.auto_provision.local_log.backup.append <y0000000000xx>.cfg
Description
It configures whether the uploaded local log files (<MAC>-boot.log and <MAC>-sys.log) overwrite the
existing files or are appended to the existing files.