Yealink W53P - Phone Directory Management; Local Directory Operations; Shared Directory Management

Administrator’s Guide for W60P/W53P/W41P DECT Phones
30
Default 3478
Web UI Network->NAT->STUN->STUN Port (1024~65535)
Parameter
static.ice.enable
[2]
<y0000000000xx>.cfg
Description It enables or disables the ICE (Interactive Connectivity Establishment) feature on the IP phone.
Permitted Val-
ues
0-Disabled
1-Enabled
Default 0
Web UI Network->NAT->ICE->Active
Parameter
static.sip.nat_turn.enable
[2]
<y0000000000xx>.cfg
Description It enables or disables the TURN (Traversal Using Relays around NAT) feature on the IP phone.
Permitted Val-
ues
0-Disabled
1-Enabled
Default 0
Web UI Network->NAT->TURN->Active
Parameter
static.sip.nat_turn.server
[2]
<y0000000000xx>.cfg
Description
It configures the IP address or the domain name of the TURN (Traversal Using Relays around NAT)
server.
Example:
static.sip.nat_turn.server = 218.107.220.202
Note: It works only if “static.sip.nat_turn.enable” is set to 1 (Enabled).
Permitted Val-
ues
IP Address or Domain Name
Default Blank
Web UI Network->NAT->TURN->TURN Server
Parameter
static.sip.nat_turn.port
[2]
<y0000000000xx>.cfg
Description
It configures the port of the TURN (Traversal Using Relays around NAT) server.
Example:
static.sip.nat_turn.port = 3478
Note: It works only if “static.sip.nat_turn.enable” is set to 1 (Enabled).
Permitted Val-
ues
Integer from 1024 to 65535
Default 3478
Web UI Network->NAT->TURN->TURN Port (1~65535)
Parameter
static.sip.nat_turn.username
[2]
<y0000000000xx>.cfg
Description
It configures the user name to authenticate to TURN (Traversal Using Relays around NAT) server.
Example:
static.sip.nat_turn.username = admin