Yealink W53P

Administrator’s Guide for W60P/W53P/W41P DECT Phones
52
If the IP phone reboots repeatedly after it is set to 1, you can try to set “static.auto_provision.power_on"
to 0 (Off).
Permitted
Values
0-Disabled
1-Enabled
Default Blank
Parameter static.auto_provision.power_on <y0000000000xx>.cfg
Description It triggers the power on feature to on or off.
Permitted
Values
0-Off
1-On, the IP phone will perform auto provisioning when powered on.
Default 1
Web UI Settings->Auto Provision->Power On
Parameter static.auto_provision.repeat.enable <y0000000000xx>.cfg
Description It triggers the repeatedly feature to on or off.
Permitted
Values
0-Off
1-On
Default 0
Web UI Settings->Auto Provision->Repeatedly
Parameter static.auto_provision.repeat.minutes <y0000000000xx>.cfg
Description
It configures the interval (in minutes) for the IP phone to perform auto provisioning repeatedly.
Note: It works only if “static.auto_provision.repeat.enable” is set to 1 (On).
Permitted
Values
Integer from 1 to 43200
Default 1440
Web UI Settings->Auto Provision->Interval(Minutes)
Parameter static.auto_provision.weekly.enable <y0000000000xx>.cfg
Description It triggers the weekly feature to on or off.
Permitted
Values
0-Off
1-On, the IP phone will perform an auto provisioning process weekly.
Default 0
Web UI Settings->Auto Provision->Weekly
Parameter static.auto_provision.weekly_upgrade_interval <y0000000000xx>.cfg
Description
It configures the time interval (in weeks) for the IP phone to perform auto provisioning.
If it is set to 0, the IP phone will perform auto provisioning at the specific day(s) configured by the para-
meter “static.auto_provision.weekly.dayofweek” every week.
If it is set to other values (for example, 3), the IP phone will perform auto provisioning at a random day
between the specific day(s) configured by the parameter “static.auto_provision.weekly.dayofweek” every
three weeks.