Yealink W53P

Administrator’s Guide for W60P/W53P/W41P DECT Phones
54
6-Saturday
Default 0123456
Web UI Settings->Auto Provision->Day of Week
Parameter
static.auto_provision.weekly.begin_time
static.auto_provision.weekly.end_time
<y0000000000xx>.cfg
Description
It configures the starting/ending time of the day for the DECT IP phone to perform auto provisioning
weekly.
Note: It works only if “static.auto_provision.weekly.enable” is set to 1 (On).
Permitted
Values
Time from 00:00 to 23:59
Default 00:00
Web UI Settings->Auto Provision->Time
Parameter static.auto_provision.flexible.enable <y0000000000xx>.cfg
Description
It triggers the flexible feature to on or off.
Note: The day within the period is based upon the phone's MAC address and does not change with a
reboot, whereas the time within the start and end is calculated again with every reboot. The timer starts
again after each auto provisioning.
Permitted
Values
0-Off
1-On, the DECTIP phone will perform auto provisioning at random between a starting time configured by
the parameter "static.auto_provision.flexible.begin_time" and an ending time configured by the para-
meter "static.auto_provision.flexible.end_time" on a random day within the period configured by the para-
meter "static.auto_provision.flexible.interval".
Default 0
Web UI Settings->Auto Provision->Flexible Auto Provision
Parameter static.auto_provision.flexible.interval <y0000000000xx>.cfg
Description
It configures the interval (in days) for the DECT IP phone to perform auto provisioning.
The auto provisioning occurs on a random day within this period based on the phone's MAC address.
Example:
static.auto_provision.flexible.interval = 30
The DECT IP phone will perform auto provisioning on a random day (for example, 18) based on the
phone's MAC address.
Note: It works only if “static.auto_provision.flexible.enable” is set to 1 (On).
Permitted
Values
Integer from 1 to 1000
Default 30
Web UI Settings->Auto Provision->Flexible Interval Days
Parameter static.auto_provision.flexible.begin_time <y0000000000xx>.cfg
Description It configures the starting time of the day for the IP phone to perform auto provisioning at random.