Yealink W53P

Administrator’s Guide for W60P/W53P/W41P DECT Phones
56
Permitted
Values
String
Default Blank
Parameter
static.autoprovision.X.url
[1][2]
<y0000000000xx>.cfg
Description
It configures the access URL of the provisioning server for the IP phone to perform auto provisioning
which is triggered by activation code.
Permitted
Values
URL within 511 characters
Default Blank
Parameter
static.autoprovision.X.user
[1][2]
<y0000000000xx>.cfg
Description
It configures the user name for authentication during auto provisioning which is triggered by activation
code.
Permitted
Values
String within 64 characters
Default Blank
Parameter
static.autoprovision.X.password
[1][2]
<y0000000000xx>.cfg
Description
It configures the password for authentication during auto provisioning which is triggered by activation
code.
Permitted
Values
String within 32 characters
Default Blank
Parameter static.auto_provision.dns_resolv_nosys <y0000000000xx>.cfg
Description
It enables or disables the IP phone to resolve the access URL of the provisioning server using download
libraries mechanism.
Permitted
Values
0-Disabled, the IP phone resolves the access URL of the provisioning server using the system mech-
anism.
1-Enabled
Default 1
Parameter static.auto_provision.dns_resolv_nretry <y0000000000xx>.cfg
Description
It configures the retry times when the IP phone fails to resolve the access URL of the provisioning server.
Note: For each different DNS server, it works only if “static.auto_provision.dns_resolv_nosys" is set to 1
(Enabled).
Permitted
Values
Integer from 1 to 10
Default 2
Parameter static.auto_provision.dns_resolv_timeout <y0000000000xx>.cfg
Description
It configures the timeout (in seconds) for the phone to retry to resolve the access URL of the pro-
visioning server.
Note: For each different DNS server, it works only if “static.auto_provision.dns_resolv_nosys" is set to 1
(Enabled).
Permitted
Integer from 1 to 60