Administrator’s Guide for W60P/W53P/W41P DECT Phones
68
Default Blank
Web UI Settings->Upgrade->Select And Upgrade Firmware
Parameter
over_the_air.url
[1]
<y0000000000xx>.cfg
Description
It configures the access URL of the handset firmware file.
Example:
over_the_air.url = http://192.168.1.20/61.81.30.rom
Note: The priority of parameter “over_the_air.url” is lower than “over_the_air.url.w56h”.
Permitted
Values
URL within 511 characters
Default Blank
Web UI Settings->Upgrade->Select and Upgrade Handset Firmware
Parameter
over_the_air.url.w56h
[1]
<y0000000000xx>.cfg
Description
It configures the access URL of the W56H handset firmware file.
Example:
over_the_air.url.w56h = http://192.168.1.20/61.81.0.30.rom
Note: The priority of parameter “over_the_air.url.w56h” is higher than “over_the_air.url”/“over_the_air-
.url.w53h”.
Permitted
Values
URL within 511 characters
Default Blank
Parameter over_the_air.handset_tip <y0000000000xx>.cfg
Description
It enables or disables to pop up a tip when upgrading the handset firmware from the provisioning server.
Note: It works only if “over_the_air.base_trigger” and “over_the_air.handset_trigger” are set to 0 (Dis-
abled). It is not applicable to DD phones.
Permitted
Values
0-Disabled
1-Enabled, the handset will pop up the message “Handset has a new firmware, update now?”.
Default 1
Parameter over_the_air.handset_trigger <y0000000000xx>.cfg
Description
It enables or disables to upgrade the handset firmware compulsively when the handset is registered to a
base station or turned on successfully.
It is only applicable when the current handset firmware is different with the one on provisioning server.
Note: It is not applicable to DD phones.
Permitted
Values
0-Disabled, if “over_the_air.handset_tip” is set to 1 (Enabled), it will pop up a tip on the handset to notify
the user to confirm upgrading the firmware or not. If “over_the_air.handset_tip” is set to 0, you may go to
Settings->Upgrade Firmware on the handset to trigger the upgrading manually.
1-Enabled, it will upgrade the handset firmware compulsively without a pop-up tip on the handset.
Default 1