YOKOGAWA AQ7260 OTDR

Chapter 2 CHANGING SYSTEM SETTINGS
2-31
Changing the Power Save Setting
The power save function is to save power consumption by turning OFF the LCD display’s
backlight automatically when the instrument is ON but not operated for a certain period of
time.
The power save setting can be changed as explained below.
♦ Example: “OFF” → “3min”
1. Locate the cursor to “POWER SAVE” by using the rotary knob or the arrow key.
2.
Press [ENTER].
A selection window will appear.
*OFF Disables the power save function.
30sec
Enables the power save function if no keys are pressed
for 30 seconds.
1min
Enables the power save function if no keys are pressed
for 1 minute.
3min
Enables the power save function if no keys are pressed
for 3 minutes.
5min
Enables the power save function if no keys are pressed
for 5 minutes.
10min
Enables the power save function if no keys are pressed
for 10 minutes.
Selectable
power save
settings
20min
Enables the power save function if no keys are pressed
for 20 minutes.
*: Indicates the default setting.
TIP