Chapter 2 CHANGING SYSTEM SETTINGS
2-35
Changing the Print Type
The print type can be changed as explained below.
♦ Example: “HORIZONTAL” → “SCREEN”
1. Locate the cursor to “PRINT TYPE” by using the rotary knob or the arrow key.
2.
Press [ENTER].
A selection window will appear.
3. Locate the cursor to “SCREEN” by using the rotary knob or [S] / [T].
4. Press [ENTER] to register the change made to the print type.
The change will not be registered if [ESC] is pressed instead of [ENTER].
*HORIZONTAL Prints along the print direction.
The mode, function, time and guidance will not be printed.
VERTICAL Prints across the print direction.
The mode, function, time and guidance will not be printed.
Selectable
print types
SCREEN Prints across the print direction.
All the pieces of information displayed in the screen is printed.
*: Indicates the default setting.
Caution
TIP
To Next Page
Loading...
Need help?
General
