Chapter 3 PERFORMING MEASUREMENTS
3-32
The average method can be changed as explained below.
♦ Example: “NORMAL” → “Hi-RETURN”
1. Locate the cursor to “AVERAGE METHOD” by using the rotary knob or the
arrow key.
2. Press [ENTER].
A selection window will appear.
*: Indicates the default setting.
3. Locate the cursor to “Hi-RETURN” by using the rotary knob or [S] / [T].
4. Press [ENTER] to register the change made to the average method.
5. Press [F4] (DONE) to register the changes made to the measurement
conditions.
When changing the condition for two or more items, it is recommended to change
the condition for each item first and then press [F4].
Refer to the notes given on changing the measurement conditions (page 3-50).
TIP
Refer
TIP
Hi-RETURN
*NORMAL
Selectable
average methods
Hi-SPEED
To Next Page
Loading...
