Chapter 3 PERFORMING MEASUREMENTS
3-98
Changing the ID No.
The No. is used in combination with the SUB No. described in the next section.
For the description on the increment of No., refer to page 3-100.
This section explains how to change the main No. attached to a file name.
♦ Example: “000” → “003”
No. cannot be changed if “COM” has been selected as the file name format.
1. Locate the cursor to “ID No.” by using the arrow key.
2. Press [ENTER].
A selection window will appear.
*: Indicates the default setting.
TIP
Selectable
ID No.
* 000
to
999
(1 step)
Caution
Refer
To Next Page
Loading...
