Chapter 5 EDITING AUTOMATIC SEARCH RESULTS
5-13
4. Press [ENTER].
5. Press [F2] (EVENT EDIT).
6. Press [F4] (NEXT EVENT) or [F5] (PREVIOUS EVENT) to set event No.3 as the
current event.
7.
Press [F3].
8. Locate the cursor to the point to which marker
1
is to be moved by turning the
rotary knob.
If necessary, enlarge the trace.
•For the method of moving the cursor, refer to page 3-64.
•For the method of enlarging the trace, refer to page 3-66.
Refer
To Next Page
Loading...
