Chapter 8 USING OPTIONS AND EXTERNAL DEVICES
8-26
5. Press [ENTER].
A selection window will appear.
*: Indicates the default setting.
6.
Locate the cursor to “38400” by using the rotary knob or [S] / [T].
7. Press [ENTER] to register the change made to the baud rate setting.
Changing the Flow Control Setting
The flow control can be changed as explained below.
♦ Example: “NONE” → ”HARDWARE”
8.
Locate the cursor to “FLOW CONTROL” by using the rotary knob or the arrow
key.
TIP
2400
4800
*9600
19200
38400
57600
Selectable
baud rates
115200
To Next Page
Loading...
