Chapter 8 USING OPTIONS AND EXTERNAL DEVICES
8-27
9. Press [ENTER].
A selection window will appear.
*: Indicates the default setting.
10.
Locate the cursor to “HARDWARE” by using the rotary knob or [S] / [T].
11. Press [ENTER] to register the change made to the flow control setting.
Other Settings
Item Setting
Data bits 8 bits (fixed)
Parity None (fixed)
Stop bits 1 bit (fixed)
TIP
*NONE Disables flow control.
Selectable flow
control settings
HARDWARE Uses the flow control setting made on the device (personal
computer) connected to the instrument.
To Next Page
Loading...
