Chapter 2 CHANGING SYSTEM SETTINGS
2-8
Changing the Cursor Type
The cursor type can be changed as explained below.
♦ Example: “CROSS(+)” → “LINE( | )”
1. Locate the cursor to “CURSOR” by using the rotary knob or the arrow key.
2.
Press [ENTER].
A selection window will appear.
3. Locate the cursor to “LINE( | )” by using the rotary knob or [S] / [T].
4. Press [ENTER] to register the change made to the cursor type.
The change will not be registered if [ESC] is pressed instead of [ENTER].
*CROSS(+) Displays the cursor by a cross (+).
Selectable
cursor types
LINE( | ) Displays the cursor by a line ( | ).
*: Indicates the default setting.
TIP
Caution
To Next Page
Loading...
Need help?
General
