Chapter 2 CHANGING SYSTEM SETTINGS
2-29
6. Enter the same lockout code again.
Enter it according to steps 5-1 to 5-9.
y The lockout function will be enabled when the same lockout code is entered at
both steps 5 and 6.
y Do not forget the lockout code. It will be required when disabling the function.
Disabling the Lockout Function
1. Perform steps 1 and 2.
2. Select “OFF” in the selection window.
3. Enter the same lockout code.
4. Press the [F1] (DONE) key.
Caution
To Next Page
Loading...
