YOKOGAWA UT55A User Manual

13-8
IM 05P01C31-01EN
13.1.5 RegisteringSELECTParameterDisplay(Upto10Displays)
Description
Registering frequently changed operation parameters (change frequency is lower than
SELECT Display) in the SELECT Parameter Display will allow you to change parameter
settings easily. A maximum of ten Displays can be registered.
Set the D register number of the parameter you wish to register for the registration to the
SELECT Parameter Display.
However, the parameters in the following menus cannot be set:
CTL,
PV,
RSP,AIN2,AIN4,MPV,OUT,HBA,R485,ETHR,PROF,DNET,CC-L,KEY,
DISP,CSEL,KLOC,MLOC,DI.SL,DI.NU,DI.D,ALM,DO,I/O,SYS,INIT,VER,and
LVL.
When each parameter is displayed, the terminal area (E1 to E4) is displayed on Group
display according to the suffix code and optional suffix code.
MODE Menu Display
Registered
SELECT Parameter Display
Parameter Setting Displays
CS Menu Display
• • • • • • • •
• • • •
Ordinary Operation Display
CS Menu is not displayed if
SELECT parameter is not
registered.
13.1 Setting Display Functions

YOKOGAWA UT55A Specifications

General

Brand	YOKOGAWA
Model	UT55A
Category	Temperature Controller
Language	English