YOKOGAWA UT55A - Operation Display Transitions in Loop Control with PV Switching and Loop Control with PV Auto-Selector; Standard Type

6-5
IM 05P01C31-01EN
MonitoringandControlofRegularOperations
6
6.1.2 OperationDisplayTransitionsinLoopControlwithPVSwitchingand
LoopControlwithPVAuto-selector
► Display/non-display of Operation Display: 13.3.5 Setting Display/Non-display of Operation Display
► Registration of SELECT Display: 13.1.3 Registering SELECT Display (Up to 5 Displays)
Standard Type
Program Pattern Number Display (Display only)
Parameter RMS = PROG
SP Display (SP can be changed.)
OUT Display (OUT can be changed in MAN mode.)
PID Number Display (display only)
(Factory default: non-display)
Heater Break Alarm-1 Current Display (display only)
(Only for Heater break alarm option)
Heater Break Alarm-2 Current Display (display only)
(Only for Heater break alarm option)
SELECT Displays 1 to 5
(Displayed only when SELECT Display is registered.)
(The figure on the left is the example of
the parameter A1 (alarm-1 setpoint).)
Analog Input Displays (display only)
PV: PV analog input,
RSP: RSP analog input (E1-terminal area),
AIN2: AIN2 analog input (E2-terminal area),
AIN4: AIN4 analog input (E4-terminal area)
(Depends on the aux. analog input and the control mode.)
6.1MonitoringandControlofOperationDisplays