EasyManua.ls Logo

Zebra DS4308 - Connecting a USB Interface

Zebra DS4308
520 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 - 2 DS4308/DS4308P Digital Scanner Product Reference Guide
Connecting a USB Interface
Figure 6-1
USB Connection.
The digital scanner connects with USB-capable hosts including:
Desktop PCs and notebooks
Apple™ iMac, G4, iBooks (North America only)
IBM SurePOS terminals
Sun, IBM, and other network computers that support more than one keyboard.
The following operating systems support the digital scanner through USB:
Windows
®
98, 2000, ME, XP
MacOS 8.5 - MacOS 10.6
IBM 4690 OS.
The digital scanner also interfaces with other USB hosts which support USB Human Interface Devices (HID).
Interface cable
USB series A
shielded connector
NOTE When connecting via USB use the shielded connector cable (e.g., p/n CBA-U21-S07ZAR). Refer to
Solution Builder for guidance about cables. If upgrading an LS2208 or LS4208 to a DS4308, the shielded
connector cable must be used.
NOTE If using a MacOS, the USB Keystroke Delay may need to be set to Long Delay (40 msec).

Table of Contents

Other manuals for Zebra DS4308

Related product manuals