11 - 2 DS4308/DS4308P Digital Scanner Product Reference Guide
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.
Symbology Parameter Defaults
Table 11-1 lists the defaults for all symbology parameters. To change the default values, scan the appropriate
bar codes in this guide. These new values replace the standard default values in memory. To recall the default
parameter values, see Default Parameters on page 4-5.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, and miscellaneous default
parameters.
Table 11-1
Symbology Parameter Defaults
Parameter
Parameter
Number
SSI
Number
Default
Page
Number
Enable/Disable All Code Types
11-8
1D Symbologies
UPC/EAN
UPC-A 1 01h Enable
11-9
UPC-E 2 02h Enable
11-9
UPC-E1 12 0Ch Disable
11-10
EAN-8/JAN 8 4 04h Enable
11-10
EAN-13/JAN 13 3 03h Enable
11-11
Bookland EAN 83 53h Disable
11-11
Decode UPC/EAN/JAN Supplementals
(2 and 5 digits)
16 10h Ignore
11-13
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
579
580
F1h 43h
F1h 44h
000
11-15
UPC/EAN/JAN Supplemental Redundancy 80 50h 10
11-16
Decode UPC/EAN/JAN Supplemental
AIM ID
672 F1h A0h Combined
11-17
UPC Reduced Quiet Zone 1289 F8h 05h 09h Disable
11-18
Transmit UPC-A Check Digit 40 28h Enable
11-18
Transmit UPC-E Check Digit 41 29h Enable
11-18
Transmit UPC-E1 Check Digit 42 2Ah Enable
11-19
UPC-A Preamble 34 22h System Character
11-20
To Next Page
Loading...
Need help?
General
