USB Interface 6 - 5
USB Host Parameters
USB Device Type
Select the desired USB device type. To select a country keyboard type for the USB Keyboard HID host, see
Appendix B, Country Codes.
NOTE When changing USB Device Types, the digital scanner automatically resets and issues the standard
startup beep sequences.
NOTE Select IBM Hand-Held USB to disable data transmission when an IBM register issues a Scan Disable
command. Aim, illumination, and decoding is still permitted. Select IBM OPOS (IBM Hand-Held USB with
Full Scan Disable) to completely shut off the digital scanner when an IBM register issues a Scan Disable
command, including aim, illumination, decoding and data transmission.
NOTE For a list of supported scanner functionality by communication protocol, see
Appendix I, Communication Protocol Functionality.
*
USB Keyboard HID
IBM Table-Top USB
IBM Hand-Held USB
IBM OPOS
(IBM Hand-Held USB with Full Scan Disable)
To Next Page
Loading...
Need help?
General
