6 - 6 DS4308/DS4308P Digital Scanner Product Reference Guide
USB Device Type (continued)
Simple COM Port Emulation
USB CDC Host
SSI over USB CDC
Symbol Native API (SNAPI) with Imaging Interface
Symbol Native API (SNAPI) without Imaging Interface
NOTE Before selecting USB CDC Host, install the CDC INF file on the host to ensure the digital scanner does
not stall during power up (due to a failure to enumerate USB). If the digital scanner stalls, to recover it:
1
. Install the CDC INF file
or
2. After power-up, hold the trigger for 10 seconds, which allows the digital scanner to power up using an
alternate USB configuration. Upon power-up, scan another USB Device Type.
NOTE To select the Toshiba TEC device type, refer to the Toshiba TEC Programmer’s Guide.
To Next Page
Loading...
