USB Interface 6 - 11
USB Keyboard FN 1 Substitution
This option applies only to the
USB Keyboard HID
device. Enable this to replace any FN 1 characters in a GS1
128 bar code with a user-selected Key Category and value (see FN1 Substitution Values on page 4-44 to set
the Key Category and Key Value).
Function Key Mapping
ASCII values under 32 are normally sent as a control-key sequences (see Table 6-2 on page 6-18). Enable this
parameter to send the keys in bold in place of the standard key mapping. Table entries that do not have a bold
entry remain the same whether or not you enable this parameter.
Enable USB Keyboard FN 1 Substitution
*Disable USB Keyboard FN 1 Substitution
*Disable Function Key Mapping
Enable Function Key Mapping
To Next Page
Loading...
