Zebra DS4308 - Data Matrix; Data Matrix Inverse

Symbologies 11 - 77
Data Matrix
Parameter # 292 (SSI # F0h, 24h)
To enable or disable Data Matrix, scan the appropriate bar code below.
Data Matrix Inverse
Parameter # 588 (SSI # F1h 4Ch)
This parameter sets the Data Matrix inverse decoder setting. Options are:
• Regular Only - the digital scanner decodes regular Data Matrix bar codes only.
• Inverse Only - the digital scanner decodes inverse Data Matrix bar codes only.
• Inverse Autodetect - the digital scanner decodes both regular and inverse Data Matrix bar codes.
*Enable Data Matrix
(1)
Disable Data Matrix
(0)
NOTE For the DS4308-XD, this parameter is always set to Inverse Autodetect and cannot be changed.
Regular
(0)
Inverse Only
(1)
*Inverse Autodetect
(2)