USB Interface 6 - 13
USB Static CDC
When disabled, each device connected consumes another COM port (first device = COM1,
second device = COM2, third device = COM3, etc.)
When enabled, each device connects to the same COM port.
Direct I/O Beep
The host can send a direct I/O beep request to the digital scanner. If you select Ignore Direct I/O Beep, the
scanner does not sound beeps on this command. All directives are still acknowledged to the USB host as if
they were processed.
*Enable USB Static CDC
Disable USB Static CDC
*Honor Direct IO Beep
Ignore Direct IO Beep
To Next Page
Loading...
Need help?
General
