Symbologies 11 - 15
User-Programmable Supplementals
Supplemental 1: Parameter # 579 (SSI # F1h 43h)
Supplemental 2: Parameter # 580 (SSI # F1h 44h)
If you selected a Supplemental User-Programmable option from Decode UPC/EAN/JAN Supplementals on
page 11-12, select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits
using the numeric bar codes beginning on page G-1. Select User-Programmable Supplemental 2 to set a
second 3-digit prefix. Then select the 3 digits using the numeric bar codes beginning on page G-1. The default
is 000 (zeroes).
NOTE DS4308-XD: Use the Data Matrix bar codes below to set this feature.
User-Programmable Supplemental 1 User-Programmable Supplemental 1
User-Programmable Supplemental 2 User-Programmable Supplemental 2
To Next Page
Loading...
