Zebra DS4308 Product Reference Guide

6 - 8 DS4308/DS4308P Digital Scanner Product Reference Guide
USB CAPS Lock Override
This option applies only to the USB Keyboard HID device. Enable this to preserve the case of the data
regardless of the state of the Caps Lock key. This setting is always enabled for the Japanese, Windows
(ASCII) keyboard type and can not be disabled.
USB Ignore Unknown Characters
This option applies only to the USB Keyboard HID device and IBM device. Unknown characters are characters
the host does not recognize. Select Send Bar Codes With Unknown Characters to send all bar code data
except for unknown characters. The digital scanner issues no error beeps.
Select Do Not Send Bar Codes With Unknown Characters, for IBM devices, to prevent sending bar codes
containing at least one unknown character are to the host, or for
USB Keyboard HID devices, this sends the bar
code characters up to the unknown character. The digital scanner issues an error beep.
Override Caps Lock Key
(Enable)
*Do Not Override Caps Lock Key
(Disable)
*Send Bar Codes with Unknown Characters
(Transmit)
Do Not Send Bar Codes with Unknown Characters
(Disable)

Zebra DS4308 Specifications

General

Sealing	IP42
Connectivity	USB, RS232, Keyboard Wedge, TGCS (IBM) 46XX over RS485
Decode Capability	1D, 2D, PDF417
Drop Specification	Withstands multiple 1.5 m (5 ft) drops to concrete
Operating Temperature	32° to 104° F/0° to 40° C
Storage Temperature	-40° to 158° F/-40° to 70° C
Humidity	5% to 95% (non-condensing)
Weight	5.7 oz./161.9 g
Dimensions	6.5 in. H x 2.6 in. W x 3.6 in. D 16.5 cm H x 6.6 cm W x 9.1 cm D