Zebra DS4308 - UPC Reduced Quiet Zone; Transmit UPC-A Check Digit

11 - 18 DS4308/DS4308P Digital Scanner Product Reference Guide
UPC Reduced Quiet Zone
Parameter # 1289 (SSI # F8h 05h 09h)
Scan one of the following bar codes to enable or disable decoding UPC bar codes with reduced quiet zones. If
you select Enable, select a 1D Quiet Zone Level on page 11-93.
Transmit UPC-A Check Digit
Parameter # 40 (SSI # 28h)
The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate
bar code below to transmit the bar code data with or without the UPC-A check digit. It is always verified to
guarantee the integrity of the data.
Enable UPC Reduced Quiet Zone
(1)
*Disable UPC Reduced Quiet Zone
(0)
*Transmit UPC-A Check Digit
(1)
Do Not Transmit UPC-A Check Digit
(0)