Zebra DS4308 - Hands-Free Mode

4 - 20 DS4308/DS4308P Digital Scanner Product Reference Guide
Hands-Free Mode
Parameter # 630
(SSI # F1h 76h)
In hands-free mode, when you place the DS4308 in the Intellistand, or the DS4308P on the countertop, it
automatically triggers when presented with a bar code. Lifting the digital scanner causes it to behave according
to the setting of the Hand-Held Trigger Mode on page 4-19.
If you select Disable Hands-Free Mode, the digital scanner behaves according to the setting of the Hand-Held
Trigger Mode on page 4-19 regardless of whether the DS4308 is in the Intellistand or the DS4308P is on the
countertop.
*Enable Hands-Free Mode
(1)
Disable Hands-Free Mode
(0)