Zebra DS4308 - Direct Decode Indicator

4 - 8 DS4308/DS4308P Digital Scanner Product Reference Guide
Direct Decode Indicator
Parameter # 859
(SSI # F2h 5Bh)
This feature is only supported in Auto Aim and Standard (Level) trigger modes. Scan a bar code below to
select optional blinking of the illumination on a successful decode:
• Disable Direct Decode Indicator - illumination does not blink on a successful decode.
• 1 Blink - illumination blinks once upon a successful decode.
• 2 Blinks - illumination blinks twice upon a successful decode.
*Disable Direct Decode Indicator
(0)
1 Blink
(1)
2 Blinks
(2)