Zebra DS4308 - Standard Default Parameters

APPENDIX A STANDARD DEFAULT
PARAMETERS
Table A-1 Parameter Defaults
Parameter
Parameter
Number
SSI
Number
Default
Page
Number
User Preferences
Set Default Parameter N/A N/A Restore Defaults 4-5
Parameter Bar Code Scanning 236 ECh Enable 4-6
Beep on Decode 56 38h Enable 4-7
Direct Decode Indicator 859 F2h 5Bh Disable 4-8
Beeper Volume 140 8Ch High 4-9
Beeper Tone 145 91h Medium 4-10
Beeper Duration 628 F1h 74h Medium 4-11
Suppress Power Up Beeps 721 F1h D1h Do Not Suppress 4-11
Decode Pager Motor
(DS4308-HC and DS4308-XD)
613 F1h 65h Disable 4-12
Decode Pager Motor Duration
(DS4308-HC and DS4308-XD)
626 F1h 72h 150 msec 4-12
Night Mode Trigger
(DS4308-HC Only)
1215 F8h 04h BFh Enable 4-15
Night Mode Toggle
(DS4308-HC Only)
N/A N/A N/A 4-15
Low Power Mode 128 80h Disable 4-16
Time Delay to Low Power Mode 146 92h 1 Hour 4-17
Hand-Held Trigger Mode 138 8Ah Auto Aim 4-19