User Preferences & Miscellaneous Options 4 - 47
Dump Scanner Parameters
To debug a scanner issue, scan the following bar code with the scanner connected in USB HID keyboard mode
to Microsoft
®
Windows Notepad or Wordpad, or via RS-232 to Windows Hyperterminal. This outputs all the
scanner's asset tracking information and parameter settings to a text document in human-readable format.
Refer to the parameter numbers in this guide, or the Attribute Data Dictionary (index of parameters), to
interpret the parameter/attribute numbers in the output. The Attribute Data Dictionary (72E-149786-xx) is
available at: http://www.zebra.com/support.
NOTE For proper formatting, it may be necessary to first scan <DATA> <SUFFIX 1> (1) on page 4-43.
STISCANPARAMS
To Next Page
Loading...
