Zebra DS4308 Product Reference Guide

2 - 10 DS4308/DS4308P Digital Scanner Product Reference Guide
DS4308P Hands-Free Scanning
To operate the DS4308P in hands-free mode:
1. Ensure the scanner is properly connected to the host (see the appropriate host chapter for information on
host connections).
2. Place the scanner on the countertop or in the optional wall mount.
3. Adjust the scan angle by swiveling the scanner forward or backward in its base.
Figure 2-7 Adjusting the DS4308P
4. Present the bar code to the scanner. The scanner turns on illumination. Upon successful decode, the
scanner beeps and the LED momentarily shuts off. For more information about beeper and LED
definitions, see Table 2-1 and Table 2-2.
Figure 2-8 Scanning with the DS4308P

Zebra DS4308 Specifications

General

Brand	Zebra
Model	DS4308
Category	Barcode Reader
Language	English