Zebra DS4308 - Page 426

A - 6 DS4308/DS4308P Digital Scanner Product Reference Guide
Decode Event 256 F0h 00h Disable 7-21
Boot Up Event 258 F0h 02h Disable 7-22
Parameter Event 259 F0h 03h Disable 7-22
RS-232 Host Parameters
RS-232 Host Types N/A N/A Standard 8-7
Baud Rate N/A N/A 9600 8-9
Parity Type N/A N/A None 8-10
Stop Bits N/A N/A 1 Stop Bit 8-11
Data Bits N/A N/A 8-Bit 8-11
Check Receive Errors N/A N/A Enable 8-12
Hardware Handshaking N/A N/A None 8-12
Software Handshaking N/A N/A None 8-14
Host Serial Response Time-out N/A N/A 2 Sec 8-16
RTS Line State N/A N/A Low RTS 8-17
Beep on <BEL> N/A N/A Disable 8-17
Intercharacter Delay N/A N/A 0 msec 8-18
Nixdorf Beep/LED Options N/A N/A Normal Operation 8-19
Ignore Unknown Characters N/A N/A Send Bar Code 8-19
IBM 468X/469X Host Parameters
Port Address N/A N/A None Selected 9-4
Convert Unknown to Code 39 N/A N/A Disable 9-5
Beep Directive N/A N/A Ignore 9-5
Configuration Directive N/A N/A Ignore 9-6
Keyboard Wedge Host Parameters
Keyboard Wedge Host Type N/A N/A IBM AT Notebook 10-4
Ignore Unknown Characters N/A N/A Transmit 10-4
Keystroke Delay N/A N/A No Delay 10-5
Intra-Keystroke Delay N/A N/A Disable 10-5
Alternate Numeric Keypad
Emulation
N/A N/A Enable 10-6
Quick Keypad Emulation N/A N/A Enable 10-6
Table A-1 Parameter Defaults (Continued)
Parameter
Parameter
Number
SSI
Number
Default
Page
Number