Zebra DS6878 - Page 442

A - 2 DS6878 Product Reference Guide
Auto-reconnect in Bluetooth Keyboard Emulation
(HID Slave) Mode
N/A On Bar Code Data 4-20
Modes of Operation
(Point-to-Point/Multipoint-to-Point)
N/A Point-to-Point 4-21
Parameter Broadcast (Cradle Host Only) N/A Enable 4-22
Pairing Modes N/A Unlocked 4-23
Pairing on Contacts N/A Enable 4-24
Connection Maintenance Interval N/A 15 min 4-27
Authentication N/A Disable 4-29
Variable Pin Code N/A Static 4-30
Encryption N/A Disable 4-31
Secure Simple Pairing IO Capability
(SPP Server and SPP Master Host Mode Only)
N/A No Input/No Output 4-32
User Preferences
Set Default Parameter N/A Set Defaults 5-5
Parameter Bar Code Scanning 236 Enable 5-6
Beep After Good Decode 56 Enable 5-6
Suppress Power Up Beeps 721 Do Not Suppress 5-7
Beeper Tone 145 Medium 5-8
Beeper Volume 140 High 5-9
Beeper Duration 628 Medium 5-10
Beep on Insertion 288 Enabled 5-10
Decode Pager Motor 613 Disable 5-11
Decode Pager Motor Duration 626 150 msec 5-11
Night Mode Trigger 1215 Disable 5-14
Night Mode Toggle N/A N/A 5-14
Batch Mode 544 Normal (Do Not Batch
Data)
5-15
Hand-held Trigger Mode 138 Level 5-17
Hands-free Mode 630 Enable 5-18
Presentation Performance Mode 650 Standard 5-19
Table A-1 Standard Default Parameters (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.