Verifying the Wireless Network 169
3 In the Description box, type a description for the measurement point
(1 to 60 characters).
4 In the RSSI Options box, select display options for the dialog box:
■ To list access points that cannot be detected from this RF
measurement point, select Show Unreachable MAPs.
■ To list disabled access points, select Show Disabled MAPs.
■ To list access on other floors that can be detected from this RF
measurement point, select Show MAPs on Other Floors.
See “Reading the RF Measurement Table” on page 170 for information
about the fields in the display.
5 Click Finish to save the changes and close the box.
6 Do one of the following:
■ To use the RF interactive measurement mode, see “Using RF
Interactive Measurement Mode”.
To Next Page
Loading...
