492 CHAPTER 12: GENERATING REPORTS
6 Press Enter to complete the filter.
7 Repeat step 3 through step 6 for each user you want to display details
for.
8 To change the output directory for the report, click on the button next to
output directory, navigate to the new directory, and click Select.
9 To prevent 3WXM from replacing an existing report of the same type with
this new report, click next to Overwrite Existing Files to deselect this
option.
10 Click Generate.
11 When the report is generated, click the report link to view it.
The watch list client report contains the following sections:
■ Session Properties
■ Location History
■ Session Statistics
■ AP Statistics
(See “Using the Client Monitor Window” on page 420 for information
about the data columns in each section of the report.)
Generating a
Network Usage
Report
The network usage report lists network usage statistics.
The data for this report comes from the monitoring service. The Enable
RF trending option, located in the RF Monitor group box of the
Monitoring Settings tab, must be enabled. (See “Changing Monitoring
Settings” on page 552.)
1 Select Reports > Network Usage from the toolbar in the main 3WXM
window.
The Network Usage Report dialog box appears.
2 Select the scope type of the report from the Report Scope Type listbox:
■ Mobility Domain
■ Wireless Switch
■ Site
■ Building
To Next Page
Loading...
