Alerts Panel 51
Third-Party APs The Third Party APs section of the Organizer panel contains objects for
third-party access points. 3WXM takes these third-party access points
into consideration when calculating MAP access point placement,
channel settings, and power settings. In addition, WX switches do not
issue countermeasures against the access points in the Third Party APs
section.
Alerts Panel The Alerts panel provides brief configuration and rogue detection status.
You can click on a statistic in the Alerts section to open a tab in the
Content panel with more details.
When the Alerts panel is minimized, a flag on the panel’s title appears to
alert you when a new warning or error condition occurs. Warnings are
indicated with a yellow flag and errors are indicated with a red flag. Here
is an example of the warning flag.
Table 10 Site Objects
Object Description
Building Building in the selected site.
Floor Floor in the selected building.
Wiring Closet Wiring closet (switching closet) on the selected floor.
During planning for 3Com equipment placement, 3WXM
places WX switches in the wiring closets.
Coverage Area Wireless coverage area on the selected floor. Coverage
areas contain radios.
MAP Access Point MAP access point on the selected floor. MAP access points
contain radios.
The MAP radios are also in the coverage areas. You can
view radios from a coverage area perspective or a MAP
perspective.
Third-party Access
Point
Third-party access point on the selected floor.
To Next Page
Loading...
