Verifying Configuration Information 373
■ Make sure that the WX certificate is properly installed.
■ If the connection time takes more than 30 seconds, adjust the
Connect Timeout value. (See “Changing Network Synchronization
Options” on page 502.)
Verifying
Configuration
Information
3WXM uses a set of rules to verify WX switch configurations. Changes to
a WX switch’s configuration in 3WXM or in the live network are
automatically evaluated by comparing the changes to the rules. If the
evaluation detects any error or warning conditions, the information in the
Alerts panel is updated:
■ Errors or warnings in a WX switch’s configuration in 3WXM affect the
Configuration counts.
■ Errors or warnings in the network affect the Network counts.
Click on Configuration or Network in the Alerts panel to display the
Verification tab in the Content panel.
Warning and
error messages
Error/Warning Details
Resolutions
To Next Page
Loading...
