Configuring a Radio Profile 273
To map the radio
profile to a service
profile
To map the radio profile to a service profile, use the following procedure.
1 In the Create Radio Profile wizard, click Service Profile Selection. The
Service Profile Selection page appears.
2 Select the service profile in the Available Service Profiles list.
3 Click Add to move the profile name to the Current Service Profiles
column.
4 Do one of the following:
■ To apply the radio profile to 3com radios, click Next and see “To apply
a radio profile to radios”.
■ To configure other radio profile parameters, click a button at the top
of the wizard.
■ To close the wizard and save the changes, click Finish.
To Next Page
Loading...
