60 CHAPTER 2: WORKING WITH THE 3WXM USER INTERFACE
Events Tab The Events tab displays log messages for 3WXM, the monitoring service,
and for WX switches.
To display the Events tab, select View > Events from the main 3WXM
toolbar.
Rogue Detection Tab The Rogue Detection tab lists information about third-party wireless
devices detected in the Mobility Domain. The Mobility System Software
(MSS) running on WX switches continually performs RF scans to detect
rogue access points. Normally, if a scan detects a third-party access point,
MSS assumes the access point is a rogue and issues countermeasures
against it. You can identify friendly access points and prevent
countermeasures from being used against them by adding them to the
third-party APs section.
Unless you identify a third-party wireless device as a known device or
third-party AP, WX switches consider the device to be a rogue AP and
issue countermeasures against the device to prevent clients from being
able to use it.
To Next Page
Loading...
