502 APPENDIX B: CHANGING 3WXM PREFERENCES
Figure 16 Preferences Dialog Box
Resetting
Preferences Values
You can reset the preferences values to their default values by doing one
of the following:
■ To reset the values for a tab, click the tab to display it, and click Reset.
(Each tab has a Reset button.)
■ To reset all preferences for all tabs, click Reset All.
Changing Network
Synchronization
Options
By default, 3WXM checks for configuration changes, events, and status
changes on WX switches. You can configure checking (also called polling)
for configuration changes in the network made with the CLI,
Web Manager, or another instance of 3WXM. You also can specify
whether to be notified when changes are found and the interval at which
checks occur.
If you do not enable this option, you still can manually synchronize
3WXM with WX switches by selecting View > Managed Devices from
the toolbar in the main 3WXM window. (See “Synchronizing Local and
Network Changes” on page 383.)
1 Select Tools > Preferences. The Preferences dialog box appears.
2 Click the Network tab.
To Next Page
Loading...
