Changing Options for RF Planning 509
Changing Colors You can change the color schemes for showing the following types of RF
information:
■ 802.11a channels
■ 802.11b and 802.11g channels
■ RF obstacles
■ Radio transmit data rates
■ Receive signal strength (RSSI)
■ Signal-to-noise ratio (SNR)
■ Client load (number of clients associated with a radio)
■ Probability of a rogue device or client being in a specific location
For each scheme, you can change a color using any of the following
methods:
■ Select a color from a predefined palette.
■ Change the hue, saturation, and brightness (HSB) properties of a
color.
■ Change the red, blue, and green (RGB) properties of a color.
To Change a Color
1 Select Tools > Preferences. The Preferences dialog box appears.
2 Click the RF tab.
3 Select one of the following tabs:
■ 802.11a Channel Colors
■ 802.11b/g Channel Colors
■ RF Obstacle Colors
■ Data Rate Colors
■ RSSI Band Colors
■ SNR Band Colors
■ Load Band Colors
■ Probability Colors
4 Click on the color column for the color you want to change. The Choose
Color dialog box appears.
To Next Page
Loading...
