Configuring an SSID 255
■ For encrypted traffic, the encryption algorithm used:
■ Wired Equivalent Privacy (WEP)
■ Wi-Fi Protected Access (WPA) Temporal Key Integrity Protocol (TKIP)
■ WPA Counter Mode with Cipher Block Chaining Message
Authentication Code Protocol (CCMP)
■ WPA WEP
■ Authentication settings:
■ Fallthru method to use when a client is not authenticated by
802.1X or MAC authentication: last-resort, Web AAA, or none
■ For WPA encryption, 802.1X authentication or preshared key (PSK)
authentication
■ For Web AAA, file location of customized Web page to serve
clients for login
Configuring an SSID This section enables you to configure SSIDs. For each SSID, you can
specify the name, You also can specify the clients that are allowed to
access the SSID, and the AAA method(s) to use (local database, RADUIS
server group, or both).
1 Access the WX Switch wizard for the WX switch. (See “Accessing the
Modify Switch Wizard” on page 185.)
2 Select Wireless at the top of the wizard, if not already selected.
3 Select SSID from the organizer list on the left side of the page, if not
already selected.
To Next Page
Loading...
