Using the Client Monitor Window 445
Delta (rate of change) values are calculated with the following equation:
value at end of polling interval - value at beginning of polling interval
time difference (in seconds)
To change how you view data values, select Absolute to see absolute
values or Deltas to see rate-of-change values.
Removing a Client from the Watch List
To remove a client from the watch list, select the client, then click on
the Client Monitor window’s toolbar.
Displaying a Client’s
Geographical
Location
To display the location of a client within a site, select the client, then click
on the Client Monitor window’s toolbar. The floor the client is
currently on is displayed, as well as the client’s likely location on the floor.
The client is most likely in the vicinity of the contour shown on the floor
plan. The contour is labeled with the client’s username and IP address.
Terminating a Client’s
Session
To terminate a client’s session
1 Select the client.
2 Click on the Client Monitor window’s toolbar. The Clear User dialog
box appears.
3 Do one of the following:
■ Click Yes to terminate the session, then click Close.
■ Click No to cancel the termination request.
To Next Page
Loading...
