394 CHAPTER 8: MANAGING WX SYSTEM IMAGES AND CONFIGURATIONS
4 Select the system image.
5 Click Add to Repository. The image is added to the image repository
and appears in the Image List.
6 To close the Image Repository dialog box, click Close.
To delete a system image
1 In the Image Repository dialog box, select the image you want to delete.
2 Click Remove Image. A prompt appears.
3 Click Yes to delete the system image.
Click No to cancel the deletion process.
4 To close the Image Repository dialog box, click Close.
Distributing System
Images
You can distribute a system image to one or more WX switches in a
Mobility Domain. Optionally, you can distribute compatible configuration
information from the network plan to the WX switches at the same time.
To use a new system image, you must reboot the WX. For more
information, see “Rebooting WX Switches or MAP Access Points” on
page 403.
3Com recommends that you verify the network plan before distributing
system images.
To distribute a system image
1 In the main 3WXM window, select Changes > Distribute Images &
Configuration.
The Distribute Images & Configuration dialog box appears.
To Next Page
Loading...
